##plugins.themes.academic_pro.article.main##

Abstract

The article presents an analysis of the dynamics of interaction of a single fiber with the sampling drum of a headset during pnevmomechanical spinning. The regularity is investigated and the equation of the movement of fibers on the surface of the tooth of the sampling drum headset is obtained. It was found that the dependences of the movement of fibers along the tooth at different angles of inclination, the distribution of fiber tension along the arc, and the distribution of fiber speeds in the region of the sampling arc have an increase property. As a result of the analysis of the tension and speed of the fibers, it was found that with the increase in the sampling zone, the tension force and speed of the fiber increase.

Keywords

Fibers Sampling Angle Friction Force

##plugins.themes.academic_pro.article.details##

How to Cite
Jamshid Yuldashev Qambaraliyevich, & Umarov Akbarjon Axrorjon o‘g‘li. (2022). Experimental Study of Motion Modes of Discrete Drum with Different Input. Texas Journal of Engineering and Technology, 15, 200–202. Retrieved from https://zienjournals.com/index.php/tjet/article/view/3092

References

  1. Jamshid, Y. , Akbarjon, U. and Olimjon, S. (2020) Dynamics of Interaction of a Single Fiber with a Headset of a Sampling Drum. Engineering, 12, 347-355. doi: 10.4236/eng.2020.126027.
  2. Исследования по измерению деформации пряжи при помощи оптических приборов // Universum: технические науки : электрон. научн. журн. Бобожанов Х.Т. [и др.]. 2018. № 12 (57). URL: https://7universum.com/ru/tech/archive/item/6716 (дата обращения: 23.06.2022).
  3. Yuldashev J. Q. et al. Analysis of Modern Sportswear Materials //International Journal of Advanced Research in Science, Engineering and Technology. INDIA. – 2019. – Т. 6. – №. 3. – С. 8535-8540.
  4. Ugli, Y. A. A., Tokhirovich, B. H., & Qambaraliyevich, Y. J. (2021). Analysis of changes in the physical and mechanical properties of twisted yarns as a result of finishing. ACADEMICIA: An International Multidisciplinary Research Journal, 11(3), 117-122
  5. Aнализ деформационных свойств высокоэластичных трикотажных полотен для проектирования спортивных одежды // Universum: Технические науки : электрон. научн. журн. Максудов Н.Б. [и др.]. 2018. № 9(54). URL: http://7universum.com/ru/tech/archive/item/6370
  6. Yuldashev Jamshid Qambaralievich. (2022). RESEARCH TO IMPROVE THE WORKING PARTS OF A PNEUMO-MECHANICAL SPINNING MACHINE. E Conference Zone, 17–18. Retrieved from http://www.econferencezone.org/index.php/ecz/article/view/906
  7. Расчет силы трения волокон о переднюю гран зуба дискретизирующего барабана прядильной машины // Universum: Технические науки : электрон. научн. журн. Жуманиязов К.Ж. [и др.]. 2018. № 11(56). URL: http://7universum.com/ru/tech/archive/item/6605
  8. Zarnigorkhon Khamrakulova. (2022). IMPROVING PRODUCT QUALITY BY IMPROVING THE WORKING BODY OF THE SPINNING MACHINE. E Conference Zone, 21–24. Retrieved from http://econferencezone.org/index.php/ecz/article/view/1127
  9. Dilshodbek Olimjonov, Jamshid Yuldashev, & Muslima Juraeva. (2022). PROSPECTS FOR TEXTILE FABRICS. Conferencea, 237–243. Retrieved from https://www.conferencea.org/index.php/conferences/article/view/898
  10. Yuldashev, Jamshid Qambaralievich, and Husankhon Tokhirovich Bobojanov. "Study Of The Influence Of The Parameters Of The Sampling Zone On The Condition Of The Capture Of Fibers By The Drum Teeth." The American Journal of Engineering and Technology 2.08 (2020): 75-78.
  11. H T Bobajonov et al 2017 IOP Conf. Ser.: Mater. Sci. Eng. 254 082005
  12. Bobojonov, H. T., Yusupov, A. A., Yuldashev, J. Q., & Sadikov, M. R. (2020). Influence of deformation properties of yarn on the quality of knitted fabric. Test Engineering and Management, 29502-29513.
  13. Jamshid Yuldashev, & Muslima Juraeva. (2022). THE DEVELOPMENT OF THE SELECTION PROCESS IN OUR REPUBLIC AND ITS PRACTICAL IMPORTANCE. Conferencea, 29–33. Retrieved from https://conferencea.org/index.php/conferences/article/view/1479