Research on the Improvement of the Suction Pipe of a Pneumo-Mechanical Spinning Machine

Authors

  • Jamshid Yuldashev Qambaraliyevich Candidate of technical sciences, Namangan Institute of Engineering and Technology
  • Umarov Akbarjon Axrorjon o‘g‘li Assistant, Namangan Institute of Engineering and Technology

Keywords:

maturity, fiber, vacuum, thread

Abstract

In this article, the possibilities of improving the quality indicators of products by improving the operating parameters of the dust-removing air duct of the rotor spinning machine have been studied. The results obtained were analyzed and studie.

References

Jamshid, Y. , Akbarjon, U. and Olimjon, S. (2020) Dynamics of Interaction of a Single Fiber with a Headset of a Sampling Drum. Engineering, 12, 347-355. doi: 10.4236/eng.2020.126027.

Исследования по измерению деформации пряжи при помощи оптических приборов // Universum: технические науки : электрон. научн. журн. Бобожанов Х.Т. [и др.]. 2018. № 12 (57). URL: https://7universum.com/ru/tech/archive/item/6716 (дата обращения: 23.06.2022).

Yuldashev J. Q. et al. Analysis of Modern Sportswear Materials //International Journal of Advanced Research in Science, Engineering and Technology. INDIA. – 2019. – Т. 6. – №. 3. – С. 8535-8540.

Ugli, Y. A. A., Tokhirovich, B. H., & Qambaraliyevich, Y. J. (2021). Analysis of changes in the physical and mechanical properties of twisted yarns as a result of finishing. ACADEMICIA: An International Multidisciplinary Research Journal, 11(3), 117-122

Aнализ деформационных свойств высокоэластичных трикотажных полотен для проектирования спортивных одежды // Universum: Технические науки : электрон. научн. журн. Максудов Н.Б. [и др.]. 2018. № 9(54). URL: http://7universum.com/ru/tech/archive/item/6370

Yuldashev Jamshid Qambaralievich. (2022). RESEARCH TO IMPROVE THE WORKING PARTS OF A PNEUMO-MECHANICAL SPINNING MACHINE. E Conference Zone, 17–18. Retrieved from http://www.econferencezone.org/index.php/ecz/article/view/906

Расчет силы трения волокон о переднюю гран зуба дискретизирующего барабана прядильной машины // Universum: Технические науки : электрон. научн. журн. Жуманиязов К.Ж. [и др.]. 2018. № 11(56). URL: http://7universum.com/ru/tech/archive/item/6605

Zarnigorkhon Khamrakulova. (2022). IMPROVING PRODUCT QUALITY BY IMPROVING THE WORKING BODY OF THE SPINNING MACHINE. E Conference Zone, 21–24. Retrieved from http://econferencezone.org/index.php/ecz/article/view/1127

Dilshodbek Olimjonov, Jamshid Yuldashev, & Muslima Juraeva. (2022). PROSPECTS FOR TEXTILE FABRICS. Conferencea, 237–243. Retrieved from https://www.conferencea.org/index.php/conferences/article/view/898

Yuldashev, Jamshid Qambaralievich, and Husankhon Tokhirovich Bobojanov. "Study Of The Influence Of The Parameters Of The Sampling Zone On The Condition Of The Capture Of Fibers By The Drum Teeth." The American Journal of Engineering and Technology 2.08 (2020): 75-78.

H T Bobajonov et al 2017 IOP Conf. Ser.: Mater. Sci. Eng. 254 082005

Bobojonov, H. T., Yusupov, A. A., Yuldashev, J. Q., & Sadikov, M. R. (2020). Influence of deformation properties of yarn on the quality of knitted fabric. Test Engineering and Management, 29502-29513.

Jamshid Yuldashev, & Muslima Juraeva. (2022). THE DEVELOPMENT OF THE SELECTION PROCESS IN OUR REPUBLIC AND ITS PRACTICAL IMPORTANCE. Conferencea, 29–33. Retrieved from https://conferencea.org/index.php/conferences/article/view/1479

Downloads

Published

2022-12-22

How to Cite

Jamshid Yuldashev Qambaraliyevich, & Umarov Akbarjon Axrorjon o‘g‘li. (2022). Research on the Improvement of the Suction Pipe of a Pneumo-Mechanical Spinning Machine. Texas Journal of Engineering and Technology, 15, 190–193. Retrieved from https://zienjournals.com/index.php/tjet/article/view/3088

Issue

Section

Articles

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.