Generation of Different Steps Shaft on CNC Lathe Utilizing G-Code Programming
Keywords:
operation, programming, dimensional, informationAbstract
Different kind of parts can be machined on the CNC machine utilizing g- code as the programming dialect. The TPS3910 preparing machine arrangement were obtained for commonsense works out within the CNC research facility to improve student’s information of CNC parts programming. The paper profiles the strategies for creating a four step shaft on lathe utilizing g-code programming. Plastic work piece of 70mm in length and 20mm distance across was utilized as the clear since as it were nonmetallic fabric can be machined on the preparing machine gear. The required parameters required for the programming are the measurements of the shaft to be created. After the set-up of the machine, vital information for x, y, and z facilitates were decided. The program was run on recreation mode some time recently machining mode to anticipate any mistake amid the real machining operation. The result approves CNC machining operation tall dimensional exactness and nonattendance of blunder utilizing g-code programming.
References
Anuradha, N., Sailaja, C., Shashank, R. P.,Deepthi, R.(2017). Design and Manufacturing of Flange Disc Using CNC Technology. International Journal for Research in Applied Science and Engineering Technology. Vol. 5. Issue 8.
Bawa, M.A., Yahuza, I., Mubi, M. Y. (2014). Development of G and M-Codes for the Production of Brake Disk Using CNC Programming Language. A Paper Presented at Automotive Engineers Institute Conference in Nigeria, Vol. 4.
David, J. W. (1987) Manufacturing Systems: An Introduction to the Technologies. Open University Press, Milton Keynes, U.K.
Dweck, C. (2018). The Application of CNC Technology in Automobile Manufacturing. Retrieved Nov. 1, 2008 from http://linkedin.com.pulse.
Mohammed Nafis Osman Zahid, Keith Case, Darren Watts (2014). Optimization of Roughing. Operation in CNC Machining for Rapid Manufacturing Processes. Journal of Production and Manufacturing Research. Vol. 2: Issue1, Pp.519-529.
Osman Zahid, M. N., Case, K., Watts, D. (2014). Optimization of Roughing Operations in CNC Machining for Rapid Manufacturing Processes. Journal of Production and Manufacturing. Research, Vol. 2, No. 1. Pp.519.529
Rouse, M. (2017). Definition of G- Code. Retrieved Oct. 28 from http//:TechTarget.com/definition/computer-numerical control.cnc.
Tsiafis, I., Mamouri, P., Kompogiannis, S. (2018). Design and Manufacturing of Spiral Bevel Gear Using CNC Machines. IOP Conference Series: Material Science and Engineering. IOP Publishing. U.K.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
User Rights
Under the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC), the author (s) and users are free to share (copy, distribute and transmit the contribution).
Rights of Authors
Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.
