Effective measurement of the moisture content of the plastic mass coming out of the filter press

Authors

  • Burxonov Dovron Abdijalol oʻgʻli Teacher of the "Automatics and Technological Processes" department, Tashkent Institute of Chemical Technology, Yangiyer branch, Yangiyer city, Republic of Uzbekistan
  • Murodov Bahrom Shamsiddin o‘g‘li Teacher of the "Technological Processes and Automation" Department, Tashkent Institute of Chemical Technology Yangiyer branch, Yangiyer city, Republic of Uzbekistan
  • Rahmatov Doniyor Xudayorovich Teacher of the "Technological Processes and Automation" Department, Tashkent Institute of Chemical Technology Yangiyer branch, Yangiyer city, Republic of Uzbekistan
  • Norboev Abduahat Toxir o‘g‘li Teacher of the "Technological Processes and Automation" Department, Tashkent Institute of Chemical Technology Yangiyer branch, Yangiyer city, Republic of Uzbekistan

Keywords:

press, sensor, determined, scheme, developed

Abstract

In this article, the effectiveness of measuring the moisture content of the viscous mass coming out of the filter press using arduino uno and the FC-28 sensor was determined and a scheme was developed

References

"Municipal Waste Dewatering with a Filter Press". http://tonsperhour.com/wp- content/uploads/ Feb 2021.

Tarleton, E. S. W., R. J. (2007). Solid/liquid separation - equipment selection and process design. Elsevier. ISBN 978-0-080-46717-7.

Downloads

Published

2023-03-22

Issue

Section

Articles

How to Cite

Effective measurement of the moisture content of the plastic mass coming out of the filter press. (2023). Texas Journal of Engineering and Technology, 18, 19-21. https://zienjournals.com/index.php/tjet/article/view/3573

Most read articles by the same author(s)