The article investigated the hardness of aluminum alloys of grades AK7 and D16 according to wear resistance when applying a lithium fluoride compound as a flux, changes in abrasive wear resistance of samples. The study was conducted in the laboratory of "Foundry technologies" of the Tashkent State Technical University. Based on the results of the experiments, the authors present their conclusions in the article.


quartz sand furnace wear aluminum


How to Cite
Tursunbaev Sarvar. (2022). Changes in its Wear Resistance When Alloying Aluminum Alloys with Lithium. Texas Journal of Engineering and Technology, 12, 32–36. Retrieved from https://zienjournals.com/index.php/tjet/article/view/2362


  1. Tian-Zhang, Z., Long, J., Yong, X., & Shi-Hong, Z. (2020). Anisotropic yielding stress of 2198 Al–Li alloy sheet and mechanisms. Materials Science and Engineering: A, 771, 138572.
  2. Nodir, T., Sarvar, T., Kamaldjan, K., Shirinkhon, T., Shavkat, A., & Mukhammadali, A. (2022). THE EFFECT OF LITHIUM CONTENT ON THE MASS OF THE PART WHEN ALLOYED WITH LITHIUM ALUMINUM. International Journal of Mechatronics and Applied Mechanics, 2022(11), 52–56. https://doi.org/10.17683/ijomam/issue11.7
  3. Tursunbaev, S., Umarova, D., Kuchkorova, M., & Baydullaev, A. (2022). Study of machining accuracy in ultrasonic elliptical vibration cutting of alloyed iron alloy carbon with a germanium. Journal of Physics: Conference Series, 2176(1). https://doi.org/10.1088/1742-6596/2176/1/012053
  4. Tursunbaev, S., Turakhodjaev, N., Turakhujaeva, S., Ozodova, S., Hudoykulov, S., & Turakhujaeva, A. (2022). Reduction of gas porosity when alloying A000 grade aluminum with lithium fluoride. IOP Conference Series: Earth and Environmental Science, 1076(1). https://doi.org/10.1088/1755-1315/1076/1/012076
  5. Cisko, A. R., Jordon, J. B., Avery, D. Z., McClelland, Z. B., Liu, T., Rushing, T. W., ... & Garcia, L. (2019). Characterization of fatigue behavior of Al-Li alloy 2099. Materials Characterization, 151, 496-505. Cisko A. R. et al. Characterization of fatigue behavior of Al-Li alloy 2099 //Materials Characterization. – 2019. – Т. 151. – С. 496-505.
  6. Turakhodjaev, N., Akramov, M., Turakhujaeva, S., Tursunbaev, S., Turakhujaeva, A., & Kamalov, J. (2021). Calculation of the heat exchange process for geometric parameters. International Journal of Mechatronics and Applied Mechanics, 1(9), 90–95. https://doi.org/10.17683/IJOMAM/ISSUE9.13
  7. Qian, B., Zheng, H., Wu, R., Hou, L., Zhang, J., & Sun, J. (2022). Grain Refinement Behavior of Accumulative Roll Bonding-Processed Mg-14Li-3Al-2Gd Alloy. Journal of Materials Engineering and Performance, 31(8), 6617–6625. https://doi.org/10.1007/s11665-022-06757-w
  8. Sarvar, T., Nodir, T., & Sharofuddin, M. (2022). Changes in the Hardness of Aluminum Alloys in the Influence of Lithium. Eurasian Journal of Engineering and Technology, 8, 56-60.