Review and analysis of the most common methods for shaping worm coils
Keywords:
Worm, worm pair, cylindrical linear worm, non-linear wormAbstract
The operational qualities of a worm gear largely depend on the chemical composition, microstructure and properties of the materials used in the manufacture of the worm pair, as well as on the method of shaping the turns of the worms
References
Antonov N. P. High-speed threading with cutters by the method of successive passes [text] / N. P. Antonov / / Engineering technology. Tula: TPI Publishing House, 1971, no. 23, p. 17-28.
Anuryev V.I., Handbook of a mechanical engineer [text] / Anuryev V.I., vol. 2, M.: Mashinostroyeniye, 2001, 606s.
Zorev N. N. High-performance machining of steel with carbide cutters with interrupted cutting [text] / N.N. - M.: Mashgiz, 1961.
Blumberg V. A. Processing of parts on lathes and rotary machines [text] / V. A. Blumberg, M. A. Sergeev, I. S. Amosov and others. Mashinostroenie Publishing House, 1969-463 p.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
User Rights
Under the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC), the author (s) and users are free to share (copy, distribute and transmit the contribution).
Rights of Authors
Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.
