##plugins.themes.academic_pro.article.sidebar##

Download
pdf
Statistic
Read Counter : 93 Download : 99

##plugins.themes.academic_pro.article.main##

Abstract

The article reflects the results of the analysis of the current state and assessment of the current efficiency of the use of drilling fluids when drilling vertical and horizontal wells in the conditions of productive horizons in the territory of the Republic of Uzbekistan. On the basis of the revealed results of the analytical study, recommendations are given for increasing the technological efficiency of the used drilling fluids and chemical additives to them.

Keywords

Well drilling drilling mud chemicals

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite
Urinov Sobir Nasilloyevich, & Adizov Bobirjon Zamirovich. (2022). Analysis And Estimation of The Efficiency of The Current State of Application of Drilling Fluids and Chemicals to Them. Texas Journal of Multidisciplinary Studies, 4, 74–78. Retrieved from https://zienjournals.com/index.php/tjm/article/view/609

References

  1. Ovchinnikov V.P., Aksenova N.A. et al., Drilling fluids for opening productive layers, // Izvestiya vuzov. Oil and Gas, 2000, No. 4, p. 21-26.
  2. Valetsky Yu.V. Drilling oil and gas wells: a textbook for the beginning. prof. education. - M .: Publishing Center "Academy", 2003. - 352 p.
  3. Pimenov I.N. Analysis of the effectiveness of models for controlling the properties of drilling fluids in relation to low-clay polymer drilling fluids // Construction of oil and gas wells on land and at sea, 2012. - No. 4. - S. 32–34.
  4. Fersman A.E. Entertaining mineralogy. - St. Petersburg: Sverdlovsk book publishing house, 2015 .-- 290 p.
  5. Ishbaev. G, Asadullin R., Dilmiev M., Maidanova A., Lozkin S., Gorpinchenko V.A. Influence of salts of mono- and divalent metals on the effectiveness of lubricating additives to drilling fluids / Drilling and Oil, 2012. - No. 2. S. 22-24.
  6. Toshev Sh.O., Artykova R.R. Peculiarities of obtaining weighted drilling fluids for penetrating productive formations. Materials of the republican scientific-practical conference "Actual problems of chemical technology" Bukhara-2014, pp. 197-199.
  7. Toshev Sh.O., Abdurakhimov S.A., Adizov B.Z., Bazarov G.R. Investigation of the effect of electrolytes on the stability of drilling fluids obtained on the basis of polymineral compositions of clays. Composite materials, Uzbek scientific-technical and production journal. - Tashkent, 2019. - No. 1. - S. 88-90.
  8. Urinov A.A., Adizov A.A. Materials and reagents for the preparation of flushing solutions in the petrochemical industry // Young scientist. - 2015. No. 23. - S. 254-256.
  9. Khubbatov A.A., Bogdanova Yu.M., Sharafutdinov Z.Z. Experience in the use and improvement of synthetic drilling mud for stabilizing clay deposits at the Astrakhan gas condensate field // Nefteservis - 2012. - No. 3– P.59-61.