##plugins.themes.academic_pro.article.sidebar##

Download
pdf
Statistic
Read Counter : 111 Download : 86

##plugins.themes.academic_pro.article.main##

Abstract

The manner of seismic elements made of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) differs significantly from conventional concrete. However, limited research exists in the literature on the dynamic manner of UHPFRC seismic members due to their high cost. Limited element programs can reduce the need for experimental studies to develop design procedures for large-scale seismic elements. Validated analytical models can be utilised to investigate the impact of geometric changes, loading schemes, and reinforcement ratios on the seismic behaviour. This research employed a limited element program, specifically ABAQUS, to model a UHPFRC beam subjected to dynamic loading and evaluate the predictive accuracy of the numerical model. The material model parameters were determined based on uniaxial pressure and tensile tests. The findings from the numerical models demonstrate that the analytical model effectively predicts the dynamic behaviour of UHPFRC beams.

Keywords

Limited element analysis impact UHPFRC

##plugins.themes.academic_pro.article.details##

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

How to Cite
Inas M. Ahmed, Kamalaldin F. Hasan, Maha A. Meteab, Arzu M. Hadi, & Qais F. Hasan. (2023). Analysis of Reinforced Concrete Beam Elements Impregnated with Ultra-High-Performance Fibers. Texas Journal of Engineering and Technology, 22, 23–31. Retrieved from https://zienjournals.com/index.php/tjet/article/view/4250

References

  1. Słomka-Słupik, B., Podwórny, J., Grynkiewicz-Bylina, B., Salamak, M., Bartoszek, B., Drzyzga, W., and Maksara, M., (2021). Concrete examination of 100-year-old bridge structure above the kłodnica river flowing through the agglomeration of upper silesia in gliwice: A case study. Materials, 14(4), 981.
  2. Al-Osta, M.A., Isa, M.N., Baluch, M.H., and Rahman, M.K., (2017). Flexural behavior of reinforced concrete beams strengthened with ultra-high-performance fiber reinforced concrete. Construction and Building Materials, 134, 279-296.
  3. Gudra, T., and Stawiski, B., (2000). Non-destructive strength characterization of concrete using surface waves. Ndt & E International, 33(1), 1-6.‏
  4. Lu Z H, and Zhao Y G., (2021). Empirical Stress Strain Model for Unconfined High Strength Concrete under Uniaxial Compression. J. Mater. Civ. Eng., 1181-1186.
  5. Othman H, and Marzouk H., (2017). Limited Element Analysis of UHPFRC Plates under Impact Loads. AFGC-ACI-fib-RILEM Int. Symposium on Ultra-High Performance Fibre-Reinforced Concrete,UHPFRC 2017, 337-346.
  6. Banthia, N., Zanotti, C., and Sappakittipakorn, M., (2014). Sustainable fiber reinforced concrete for repair applications. Construction and Building Materials, 67, 405-412.
  7. Chagas, Js. Nogueira, and G. Farias Moita., (2016). Fibre Reinforced Polymers in the Rehabilitation of Damaged Masonry. Sustainable Construction. Springer Singapore, 1-21.
  8. Earij A., Alfano G., Cashell K., and Zhou X., (2017). Nonlinear Three-Dimensional Limited-Element modeling of Reinforced-Concrete Beams: Computational Challenges and Experimental Validation. Engineering Failure Analysis, 82, 92–115.
  9. Birtel V, and Mark P, (2020). Parametericed finite element modelling of RC beam shear failure, Abaqus User’s Conference 2020, 95-107.
  10. Golewski, G. L., (2021). Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length–Using the crack tip tracking (CTT) method–In the fracture toughness examinations under Mode II, through digital image correlation. Construction and Building Materials, 296, 122362.‏
  11. Zuki, S. S. M., Choong, K. K., Jayaprakash, J., and Shahidan, S., (2015). Effect of Diameter on Fire Exposed Concrete-Filled Double Skin Steel Tubular (CFDST) Columns under Concentric Axial Loads. Applied Mechanics and Materials, 802, 130-135.
  12. Hager, I., (2013). Manner of cement concrete at high temperature. Bulletin of the Polish Academy of Sciences:Technical Sciences, 61, 145-154.
  13. Dos Santos, C. C., and Rodrigues, J. P. C., (2016). Calcareous and granite aggregate concretes after fire. Journal of Building Engineering, 8, 231-242.
  14. Kodur, V., (2014). Properties of concrete at elevated temperatures. ISRN Civil engineering.
  15. Mazza, F., (2015). Seismic vulnerability and retrofitting by damped braces of fire-damaged r.c. framed buildings.Engineering Structures, 101, 179-192.
  16. Othman H, and Marzouk H., (2016). Performance of UHPFRC Plates Under Repeated Impact Load, First International Interactive Symposium on UHPC – 2016, 1-8.
  17. Singh M., Sheikh A. H., Mohamed Ali M.S., Visintin P., and Griffith M.C., (2017). Experimental and Numerical Study of The Flexural Manner of Ultra-High Performance Fibre Reinforced Concrete Beams, Construction and Building Materials 138, 12–25.
  18. Baharuddin, and Nur Khaida, (2016). Evaluation of bond strength between fire-damaged normal concrete substance and ultra-high-performance fiber-reinforced concrete as a repair material. World Journal of Engineering 13(5), 461-466.
  19. Słomka-Słupik, B., Podwórny, J., Grynkiewicz-Bylina, B., Salamak, M., Bartoszek, B., Drzyzga, W., and Maksara, M., (2021). Concrete examination of 100-year-old bridge structure above the kłodnica river flowing through the agglomeration of upper silesia in gliwice: A case study. Materials, 14(4), 981.‏
  20. Tayeh, B.A., Abu Bakar, B.H., Megat Johari, M.A., and Zeyad A.M., (2014). Microtectonic analysis of the adhesion mechanism between old concrete substrate and UHPFC, Journal of Adhesion Science and Technology, 28, 1846-1864.
  21. Budhe, S., (2017). An updated review of adhesively bonded joints in composite materials. International Journal of Adhesion and Adhesives, 72, 30-42.
  22. Wille K., Kim D.J., and Naaman A.E., (2021). Strain Hardening UHP-FRC with low fiber contents. Materials and Structures, 44, 583–598.